Apollo Smoke Sensors

ULstampvf5600

VF5600
Ionization Smoke Sensor Head

The VF5600 Ionization Smoke Detector has a molded white polycarbonate case with windresistant smoke inlets. Inside the case is a printed circuit board which has the ionization chamber mounted on one side and the signal processing and communications electronics on the other. The ionization chamber consists of a reference chamber contained inside a smoke chamber. The outer smoke chamber has inlet apertures fitted with insect resistant mesh.

Standard Features

  • Compatible with eLAN control panels
  • 5 operating modes
  • Drift compensation
  • Address is set by X-Pert card and is stored in base
  • User memory
  • Alarm flag for fast alarm reporting
  • Conventional false safe mode
  • Polarity insensitive
  • Fits 4” & 6” low profile base
  • 6” audible base
  • 4” wire relay base

VF5601 
Photoelectric Smoke Sensor Head 

The VF5601 Photoelectric detector uses the same outer case as the ionization smoke detector and is distinguished by the indicator LEDs which will flash when the detector is in standby state and steady red in alarm. The housing is white polycarbonate and will not fade. Terminals are nickel plated stainless steel.vf5601

Standard Features

  • Compatible with eLAN control panels
  • 5 operating modes
  • Drift compensation
  • Two status LEDs
  • Address is set by X-Pert card and is stored in base
  • User memory
  • Alarm flag for fast alarm reporting
  • Conventional false safe mode
  • Polarity insensitive

VF5602
Heat Detector Head

vf5602The VF5602 heat detector has a common profile with the ionization and photo smoke detector, but has a low air flow resistance case made of self extinguishing white polycarbonate.

The VF5602 Analog Addressable Thermal Sensors are designed to provide the highest effectiveness by utilizing the latest technology. The sensor is designed for operation with the eLAN addressable fire alarm control panels.

Standard Features

  • Compatible with eLAN control panels
  • 5 operating modes
  • Fits into addressable 4” bases or 6” E-Z Fit bases
  • Addressable sounder alarm base
  • Address is set by X-Pert card and stored in base
  • User memory
  • Alarm flag for fast alarm reporting
  • Fixed point or rate of rise function

vf5603

VF5603
Multisensor Detector Head

The VF5603 multi-sensor detector contains a photo smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensor are combined depends on the response mode selected. The five modes provide response behavior which incorporated pure heat detection, pure smoke detection, and a combination of both. The multi-sensor is therefore useful over the widest range of applications. The outer smoke chamber has inlet apertures fitted with insect resistant mesh.

The multi-sensor construction is similar to that of the photo detector but uses a different lid and optical moldings to accommodate the thermistor temperature sensor. The sectional view shows the arrangement of the optical chamber and the thermistor.

Standard Features

  • Compatible with eLAN control panels
  • 5 operating modes
  • Combines photo, smoke, and thermal sensor value for enhanced detection performance and false alarm reduction
  • Address is set by X-Pert addressing and is stored in the sensor base
  • Rate of rise heat signals
  • Drift compensation
  • Polarity insensitive
  • Fits 4”, 6”, or 6” low profile bases
  • 6” audible base
  • 4” relay base

vf4992

VF4992
Duct Smoke Detector

The VF4992 Series Smoke Duct Detector is the latest analog addressable innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial, and Residential applications. The unit is designed to prevent the recirculation or spread of smoke by air handling systems, fans, and blowers. Complete systems may be shut down via the unit’s on-board alarm contact in the event of smoke detection. The VF4992 is designed and built to meet all local code requirements, as well as the NFPA and ICC standards regarding HVAC supply and return duct smoke detectors. Output terminals are provided for a wide range of remote accessories such as horns, strobes, remote status indicators and test key switches or push buttons.


Standard Features

  • Patent pending “Test Port Valve” allows for aerosol smoke testing without cover removal
  • Clear cover fitted with four captive “No-Tools Required” thumbscrews
  • In-line terminal block for easier wiring
  • More wiring space than competitive models
  • Built in alarm relay test switch Unit includes green pilot and red alarm visual indicators
  • External mounting tabs do not require cover removal to install
  • One set of 15A form “C” alarm contacts

VF5630
Mounting Base - 4"

VF5636
Mounting Base - 6"

vf5630All detectors fit the VF5630 and VF5636 Mounting Bases which are low insertion force bases with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases.


Standard Features

  • XPERT addressing
  • One way fit
  • Locking feature to prevent unauthorized removal

VF2632
E-Z Fit Base

vf2632

Standard Features

  • The E-Z fit base is a low profile 6” mounting base for ACC detectors
  • High degree of protection against unauthorized removal

 

.

.


vf4990

VF4990
Aux Powered Sounder Base

The Multi-Flex family of the smoke detector sounder cases and synchronization modules provide today’s most advanced functionality and performance, delivering flexible notification capabilities for addressable systems.

Standard Features

  • Compatible panel silence functions
  • Sync network “self tests” to ensure synchronized output if “upstream” sync signal is lost
  • Sounders will operate in “failsafe” mode if sync network is compromised
  • Sync modules available in MR-1 enclosures, snap track or chassis mount for standard 2-gang box
  • Intelligent trouble reporting via onboard Trouble LED

 


vf5635

VF5635
Low Power Relay Base

The VF5635 Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closers.

Standard Features

  • Gives a set of voltage free contacts controlled by the remote output of a detector
  • Draws negligible current

 

 


vf5633

VF5633
Isolating Base

The VF5633 Isolating Base senses and detects short circuit faults on SLC loops.

Standard Features

  • Up to 20 devices may be installed between isolating bases
  • XPERT addressing
  • Accommodates a sensor head

 


vf5640

VF5640
Blank XPERT Card

A Universal address card supplied with all bases. Using a coding guide, pips are removed to set the address of the inserted detector.

Standard Features

  • Simplifies and speeds up installation and commissioning
  • Uses patented, proven technology
  • Address remains the same, no matter how often detectors are replaced
  • Flexibility to create any address

 

 


vf5605

VF5606
Isolator

The VF5605 Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.

Standard Features

  • Detects wiring short-circuits using patented technology
  • Minimizes disruption from short-circuits
  • Automatic de-isolation on short-circuit removal
  • Up to 20 devices may be installed between isolators

 


vf5634

VF5634
Isolator Base

The VF5634 Isolator Base is unique and designed to only accept the Isolator (VF5605).

Standard Features

  • Only accepts isolators